| Network Name (SSID) |
Displays the wireless network name.
Configure the network name on the General
tab. |
|
Server Based
Authentication |
Shows whether server based
authentication is used. |
|
Data Encryption
|
Displays the encryption type the driver is
using.
Configure the encryption type on the Security
tab. |
| Authentication
Type |
Displays the authentication
mode.
Configure the authentication mode on the General
tab. |
| Message
Integrity Check |
Shows whether MIC
is enabled. MIC prevents bit-flip attacks on encrypted packets. |
| Associated
AP Name |
Displays the name
of the access point the wireless adapter is associated to. |
| Associated
AP IP Address |
Shows the IP
address of the access point the wireless adapter is associated to. |
| Associated
AP MAC Address |
Displays the MAC
address of the access point the wireless adapter is associated to. |
| Power Save Mode |
Shows the power
save mode. Power
management is disabled in ad hoc mode.
Configure the power save mode on the Advanced
tab. |
| Current
Power Level |
Displays
the transmit power level
rate in mW.
Configure the transmit power level on the Advanced
tab. |
| Available
Power Levels |
Shows the 802.11a
and/or 802.11b/g available power levels. |
| Current
Signal Strength |
Shows the current
signal strength in dBm. |
| Current
Noise Level |
Displays the current noise level in dBm. |
| Up
Time |
Shows how long the
client adapter has been receiving power (in hours:minutes:seconds). If the
adapter runs for more than 24 hours, the display shows in
days:hours:minutes:seconds. |
| 802.11b
Preamble |
Displays the 802.11b
preamble format.
Configure the preamble format on the Advanced
tab. |
| Current
Receive Rate |
Shows the current
receive rate in Mbps. |
| Current
Transmit Rate |
Displays the
current transmit rate in Mbps. |
| Channel |
Shows the currently connected channel. |
| Frequency |
Displays frequency the station is
using. |
| Channel
Set |
Shows the
current channel set. |